HQLoc. Tregozzano 87 - 52100 - AREZZO, TUSCANY , ITALY

LaboratoryVia Lumiére 19 - 52100 - AREZZO, TUSCANY , ITALY

+39 338 2806914




CAPTO is a putting analysis system used by the best putting
coaches in the world. Composed by an high accuracy sensor and
associated software that can run on almost any device. It is easy
to use, highly accurate and very light.

CAPTO offers putting analysis in real time indoor and outdoor and
in real game condition. It's new cutting edge technology giving
detailed accurate and reliable putting parameters for complete

The Capto Putting sensor can be used by anyone with Android,
iOS, Windows and MacOSX, and saves information in a cloud
archive strokes database for follow-up analysis


Capto is equipped with nine measurement sensors and five calibration sensors.


The measurement sensors are 3 magnetometers, 3 gyroscopes and 3 accelerometers.

Which are the sensors used by Capto?


Capto is equipped with nine measurement sensors and five calibration sensors.

The measurement sensors are 3 magnetometers, 3 gyroscopes and 3 accelerometers. The calibration sensors are 3 thermometers, a barometer and a hygrometer. The latter are used to adjust the measurements as the environmental conditions change. Capto is equipped with a powerful calculation processor that performs on-board processing of the most significant quantities and

the first step of the sensor-fusion algorithm.


What are the accuracy of Capto sensors?


The accuracy of Capto's sensors is very high. For the magnetometer is 5 micro Tesla, for gyroscope is 5 hundredths of a degree per second, for the accelerometer, better than 5 thousandths of degree. This means that it is possible to obtain the estimates of the quantities derived with great precision.


What can be measured with Capto?

With Capto we can measure directly: 3 intensities of the magnetic field, 3 angular speeds and 3 accelerations. From these, with the integration of the gyroscopes we obtain angles values. With the integration of the accelerometers we obtain the movement speeds and, with further integration, the putter positions.


Why is frequency (FPS) so important?

The quality of the measurement of a physical phenomenon depends on the following main factors:

1) number of sensors
2) sensor accuracy
3) frequency of measurements


The number of sensors determines the independent quantities acquired and therefore the reliability and precision of the measurement. In Capto there are nine measurement sensors and five calibration sensors.

Each of the measurement sensors provides an independent value.
Capto combines the information of all the sensors through a complex sensor fusion algorithm. In the case of vision systems there is only one measuring sensor, like the camera. Even in the case of ultrasound systems there is only one sensor, even if apparently they seem three. In fact, none of the three sensors is able

to provide an independent measured value.

The accuracy of each sensor expresses how much the measured value looks like true. In Capto we measure directly 3 accelerations, 3 angular speeds and

3 magnetic intensities, all with very high precision.

The number of measurements determines the level of sampling of the phenomenon.
In the putting strokes you have speed, about 2 meters per second at the impact and angular speeds of about 60 degrees per second for the shaft.
This means that Capto (at 400 Hz), close to impact, acquires a data packet every five millimeters of trajectory and 0.15 degrees of shaft.

A 70 Hz system acquires data every 28.5 mm (more than half a ball) and 1 degree of shaft. Every value that is found between two successive acquisitions is interpolated and, in a certain sense, supposed. The same point of impact can’t be identified with an accuracy greater than the acquisition step.

Finally, it must be considered that the contact time between the ball and putter varies between 0.2 and 0.4 milliseconds and therefore the more we ascend with the frequencies the better we know the physics of the impact.



Capto is equipped with nine measurement sensors and five calibration sensors.


The measurement sensors are 3 magnetometers, 3 gyroscopes and 3 accelerometers.

The Capto Putting sensor is designed to be lightweight and easy to use.


The sensor along with the App are the core of the Capto Putting System.

Install it on the putter, launch your app and you are ready to go!

Technical characteristics:


;Wi-Fi connection @ 2.4GHz and 5GHz;

It can work indoor and outdoor up to 50 meters from the base;

Easy & quick set up;

Light & small to travel with;

Dimensions: 5,4 cm x 3,8 cm

Weight: 62 grams

Sensor placement: on the putter’s shaft MSE (Mean Square Error) accuracy 


The App along with the sensor are the core of the Capto Putting System.

Capto App is compatible with Windows, MacOSX, Android and iOS  (System Requirements: 2 GB Ram)


You can use one sensor with all your devices (unlimited), and share the data between them with an unique cloud database.


The software interface is the same for all devices. ​The data provided by the sensor allows to measures over 40 parameters.







  • Display monitor on device
  • Receive feedback even when deviceisn’t connection to the software
  • Longer battery life
  • Up to 180 minute battery life
  • New and improved shaft fixing
  • Screw no longer needed for connecting device to the shaft USB C
  • ​New unit uses USB C for chargingrather than Mini USB


GEN 2 - What’s different?​


1. There’s a new AIM FEATURE in the Capto APP

- Make a simple calibration every time you use
- You can record more than one target each session
- The Capto app will understand where player is
aiming automatically
- Add aim face number in LAB page
- Live biofeedback (sound) for good or bad aim
- Live aim compass

2. The unit has a LIVE MONITOR DISPLAY

Select the value you want to see in “Green mode” using the Capto App Display will show 3 parameters and the display hood helps visibility.
You can use Capto without device during course training and have live feedback.

Switch display mode off at any time!!



Strength Points

One of the main strengths of Capto is it's portability vs other similar devices.


One the putter has been calibrated, you can putt from anywhere on the green and capture data, so long as the software device is within range.


The simple calibration method allows for extremely reliable data of the ENTIRE stroke.

Another strength of Capto is how the software presents the data. It can be as complex as viewing the entire stroke from every conceivable angle, or as simple as knowing the face angle at impact. Keep the analysis as simple or as in depth as you wish. 

Why buy Capto?

If you want a device that shows you EXACTLY what is happening with EVERY SINGLE putting stroke on EVERY SINGLE type of putt, then Capto is the device for you.


The portability allows you to gain a complete understanding of the putting stroke, no matter the putt length, green speed or slope gradient. 

In addition, Capto provides unbelievable value for money vs its competitors. This allows in depth putting analysis possible for everyone. 

Easy Travel and Storage

Capto is so light and compact, you can take it with you anywhere.

If you travel to tournaments or work at multiple venues, it’s so easy to set up on the go.
Be ready to start your putting session in just minutes, and on almost any device (mobile, tablet or laptop.)

Stroke metrics 
View metrics of not only address and impact, but the entire stroke. For example, in the picture shown you will see a graph showing face angle throughout the stroke. You can see the face angle relative to start position for every frame. This is displayed in a graph, shown as a simple number and is conveyed using a visual representation. 

3D MOTION View the stroke and all movements of the putter from every conceivable angle.


As well as understanding specific metrics, including putt and sweet spot planes, 3D Motion allows the user to move around and view the putting stroke however they wish. Stunning visuals and precise measurements provide unparalleled feedback. 

Smart visuals 

With 3D Motion, we know we can view the stroke and all movements of the putter from every conceivable angle. Capto also provides visual representations and measurements based on more familiar views.


Examples like path and angle of attack, show measurements throughout the stroke and have intelligible visuals for the user to view.  


Live biofeedback

Receive instant feedback with live putter positions. Biofeedback on aim is immediate, allowing the user to understand the putters live position on-the-spot. The putter may be calibrated to several targets at once, increasing variation and further testing aiming ability. 



Complete portability

Once attached to the putter, Capto continues to collect data for every single putt, regardless of position on the green. Capture data over a variety of different putts, changing distance and / or slope as desired.


You may also gather stroke data without being connected to the app, making instant feedback on the course easier than


Compare Data

Single and Easy Calibration

Once Capto has been calibrated (takes less than 1 minute) it is ready to go.


It is not calibrated to a single spot, but to the putter.


This means the user can hit putts from anywhere on the putting green, travel from the putting green to the course, or from the studio to the green, without any need to recalibrate.


It also allows analysis on every type of putt distance, speed and slope, plus is a great way to analyse putting on the course

Capto allows you to compare data from current or previous sessions.


Produce before and after reports to show your clients to give them an understanding of the improvements they have made.


All putts can be saved on the cloud, allowing 1000s of putts to be easily stored and retrieved.




Create Website with | Free and Easy Website Builder